Gemac

GEMAC is a provider of individual research, development and production services in the fields of measurement and sensor systems. They have tailor-made solutions, i. e. both sensor and ASIC-design and electronic boards and development and construction of own products.

Their solutions have been used in machine and automotive construction as well as in medical science and automation technology.

Their products include:-

(A) Fieldbustester

The CAN-Bus Tester 2 constitutes a universal measuring instrument for the commissioning, analysis, monitoring, troubleshooting and service/maintenance of CAN-Bus plants.

Typical problems which occur during the operation of CAN-Bus plants, such as node failures, faults in the communication or complete standstill of the plant, often have their origins in the physical bus characteristics.

The CAN-Bus Tester 2 provides an overview of the signal conditions on the bus, which helps you locate and rectify frequently occurring error causes without unnecessary delay.

For a long-term monitoring of CAN-Bus plants GEMAC developed the CANobserver®. It is implemented into the network permanently, monitors the data transfer continuously and records it automatically for a period of up to four years.

DOWNLOAD Datasheet for CAN-Bus Tester 2

DOWNLOAD Datasheet for CANobserver®

(B) Sensors

The inclination measurement is based on the determination of the gravitation component gn=g *sina, which work on a seismic mass during inclinations out of the vertical position. The seismic mass is suspended from springs, so that the gravity component produced a movement of the mass. This movement is detected by electrodes with capacitive working principles. 

DOWNLOAD Information Sheet

To enquire more about Gemac product, please call +65-6363 1788 or e-mail atsales@asaiki.net